Blue Flame Imperial IPA on Deck for Saturday

On April 22, 2009, in Homebrewing, Recipes, by Mark Ranes
Blue Flame IPA Tap Handle

Blue Flame IPA Tap Handle

It’s time to brew this year’s Blue Flame Imperial IPA.  My 2008 Mark’s Big Foot Barleywine keg blew tonight, so the timing is right.  I have a monster starter going on the stir plate with two vials of White Labs WLP001 California Ale and one vial of White Labs WLP002 English Ale. I started it on Monday, so I have plenty of time to let it ferment out, feed it once and then chill and decant the nasty starter beer.  I’m changing it up just a bit and pulling out .3 pounds of crystal 60 and .3 pounds of crystal 40 and adding a half pound of Carastan in its place.  I liked what the Carastan did to the Mash Destruction IPA, so I thought I try it in one of my annual house ales.

There’s a possibility I may brew this IIPA Friday afternoon, but most likely it’ll be lending aromatics to the neighborhood on Saturday morning:)

Here’s the recipe:

Blue Flame Imperial IPA 2009
14-C Imperial IPA
Author: Mark Ranes
Date: 4/25/09

Size: 5.04 gal
Efficiency: 75.0%
Attenuation: 80.0%
Calories: 343.56 kcal per 12.0 fl oz

Original Gravity: 1.103 (1.075 – 1.090)
Terminal Gravity: 1.021 (1.012 – 1.020)
Color: 10.72 (8.0 – 15.0)
Alcohol: 10.93% (7.5% – 10.0%)
Bitterness: 222.4 (60.0 – 100.0)

Ingredients:
18.0 lb American 2-row
0.5 lb Carastan
.5 lb Cara-Pils® Malt
1.0 lb Corn Sugar
1.5 oz Summit (17.0%) – added during boil, boiled 90 min
.5 oz Summit (17.0%) – added during boil, boiled 45 min
.5 oz Nugget (13.0%) – added during boil, boiled 45 min
.5 oz Summit (17.0%) – added during boil, boiled 30 min
1 oz Nugget (13.0%) – added during boil, boiled 30 min
1.0 ea Whirlfloc Tablets (Irish moss) – added during boil, boiled 15 min
1.0 tsp Wyeast Nutrient  – added during boil, boiled 15 min
1.0 oz Summit (17.0%) – added during boil, boiled 5.0 min
1.0 oz Nugget (13.0%) – added during boil, boiled 5.0 min
2.0 oz Summit (17.0%) – added during boil, boiled 0.0 min
2 oz Summit (17.0%) – added dry to secondary fermenter
2.0 oz Nugget (13.0%) – added dry to secondary fermenter
500 mL starter White Labs WLP001 California Ale
500 mL starter White Labs WLP002 English Ale

Tagged with:  

Time to Keg Up!

On April 19, 2008, in Homebrew Gadgets, Homebrewing, by Mark Ranes

I had three different batches to keg up today – twenty gallons total. There were 10 gallons of Colona (a clone of Corona Mexican Lager:), 5 gallons of Blue Flame Imperial IPA, and 5 gallons of Mark’s Big Foot Barleywine. Originally I hadn’t planned on kegging the Lazy Barleywine, but I took a reading using B3’s refractometer spreadsheet and was generally pleased with what I saw, but the real test would be a hydrometer reading. Kegging with CO2My brewbuddy, Wade, had asked that I take some pictures of my kegging process. I think it is different than the way most people keg their beer in that I use CO2 to push the beer out of the carboys, rather than siphoning into the kegs using gravity. I use one of B3’s Sterile Siphon Starters, attaching a line from my CO2 regulator to the sanitary filter and then push the beer with 1-2 pounds of pressure. The beauty of this is twofold. First, it reduces the amount of oxygen, as well as spoiling agents, the beer comes in contact with, thereby reducing potential oxidation of the beer during the kegging process. Secondly, and more important from the Lazy Brewer’s point of view, the racking process goes quickly because you are not relying on a slow gravity siphon. The beer flies out of the carboy because it is pushed by CO2!

I’ve been kegging this way since I started brewing and it seems to be working. My barleywines, that often age for over a year, show no signs of oxidation. I also like the fact that I’m not introducing any bacterial or fungal stuff from my mouth as I don’t have to blow into carboy to start the siphon.

Mark's Big Foot Barleywine LabelAlthough I was really worried about the barleywine finishing way too high, it seems that somewhere along the line, the yeast chewed through most of the maltose. I’m not sure if it was the champagne yeast starter I added a couple weeks back, but the final gravity was 1.031. It seems kind of high, but it is important to remember that this barleywine started with an original gravity of 1.134. This is going to be one big ‘ole barleywine! Here’s the particulars on the barleywine:

Mark’s Big Foot Barleywine

Brewed 02/14/08 (Valentines Day:)
Original Gravity, 1.134
Final Gravity, 1.031
Alcohol by Volume, 13.86%

Colona Mexican Lager LabelI also kegged up ten gallons of Colona Mexican Lager. This is a clone of Corona – hence the name Colona. It is always well received by the masses and is the beer of choice for those folks that visit my bar, but are not craft brew drinkers. Often, after couple Colonas, they are willing to try some of the other ales I have on tap. It is a clean lawnmower beer for the summer. The two kegs will lager for another month or so before serving. Here are the details:

Colona Mexican Lager

Brewed 03/02/08
Original Gravity, 1.060
Final Gravity, 1.015
Alcohol by Volume, 5.91%

Blue Flame Imperial IPA LabelFinally, I also kegged up five gallons of Blue Flame Imperial IPA. This is the third time I’ve brewed this in the last eight months, and I’m hoping it turns out as good as the first batch. The last time I brewed the IIPA, it just didn’t have the same hop brilliance as the first batch. The sample I tasted from the hydrometer jar leads me to believe this round is as good as the first:) Here’s the info on this ale:

Blue Flame Imperial IPA

Brewed 03/15/08
Original Gravity, 1.096
Final Gravity, 1.021
Alcohol by Volume, 9.96%

Four kegs of fresh beer!

Ahh, the beauty of twenty gallons of freshly kegged beer!

Tagged with:  

Looking for something?

Use the form below to search the site:

Still not finding what you're looking for? Drop a comment on a post or contact us so we can take care of it!